EB6.7.1.153_Patch14 Hanover, 30/07/2018 This readme provides installation and applying instructions of the patch Patch installation: - To install this patch, Windows Installer in version 4.5 and Engineering Base in version 6.7.1 are required. - Patch14 for Engineering Base 6.7.1 contains Patch2, Patch3, Patch4, Patch5, Patch6, Patch7, Patch8, Patch10, Patch11, Patch12 and Patch13. - The patch installation can be started by a double-click. Local administration rights are required here. - The patch has to be installed on all "EB Client", "EB Server" and all "EB Standalone" systems. - After Setup-Execution a database update to version 38.16 has to be performed with Engineering Base Database Manager. Note: - After the installation of several patches, the Windows Installer may start when EB is started. • In this case, a repair of EB should be carried out via system control programs and functions - Applies to all EB-Power customers: The optional database update PN498: EVU Content is not part of patch14. Please install Patch9 first. Applying the patch: Patch14 for Engineering Base 6.7.1 implements the following Features: - ID 172833 - EB-Power bridges in Terminal Block Designer.. - ID 188353 - Update From Catalog Wizard: The structure should also be replaced if "Position" attribute on sub-devices in the catalog is not filled. Patch14 for Engineering Base 6.7.1 corrects the errors: - ID 164161 - Auto wires are partially not generated. - ID 178542 - After deleting a shape, cross-reference remains. - ID 180846 - Problems with material assignment in Terminal Block Designer. - ID 197694 - EB starts only up to 13%. - ID 198378 - Losing potential Cross-reference after close sheet. - ID 202384 - Existing projects can no longer be exported from a database. - ID 205915 - Trouble with filling of shapes when save as DWG file. - ID 209078 - "collation conflict" when using WebService after EB Update. - ID 210412 - Export DWG Issue : wrap text blocs are not formatted correctly. - ID 212606 - Wiring List revision comparison give wrong result. - ID 212854 - After moving drawing folders, AutoPotChain will not start. - ID 216950 - EB has problems sorting the sheet templates in the equipment diagram. - ID 217216 - Macro equipment diagram closes EB. ---------------------------------------------------------- Patch13 for Engineering Base 6.7.1 corrects the errors: - ID 198230 - Trouble with potential tag if potential designation is filled with only space characters. - ID 198855 - In a dwg the text blocks are not correct after exporting from EB. - ID 200481 - Multiline Attribute texts are displayed in one line after DWG export. ---------------------------------------------------------- Patch12 for Engineering Base 6.7.1 corrects the errors: - ID 198444 - Wrong position if drop symbol with Sheet BOP aucOpExecSheetDropSymbolDP. ---------------------------------------------------------- Patch11 for Engineering Base 6.7.1 implements the following Features: - ID 195535 - Increase the number of Windows User Groups in EngineeringBase Group. - ID 196502 - Definition of new system user attributes with units. Patch11 for Engineering Base 6.7.1 corrects the errors: - ID 183271 - Circuit can not be copied across projects. - ID 184906 - TBD: Error message if potentials located below terminal block. - ID 187134 - Advanced Typcial Manager: Option representation is not copied. - ID 190987 - Aucx import creates unneeded equipment diagram stencils. - ID 194535 - Export PID to DWG file format failed. - ID 194855 - The total number of pages in a report is incorrect. - ID 195166 - Toolbar flickers on different actions. - ID 196065 - Revision: Error message "GetSymbolAttributesData". - ID 197059 - EB freezes during graphical revision. - ID 197192 - Convert to PDF outputs file with 0KB. - ID 197558 - Masks open strongly delayed. - ID 198230 - Trouble with potential tag if potential designation is filled with only space characters. ---------------------------------------------------------- Patch10 for Engineering Base 6.7.1 corrects the errors: - ID 179564 - Error during connection of pins in single line diagram. - ID 180183 - Wrong connections during update of circuit components - ID 181106 - Window postion is not saved. - ID 181227 - Different behavior for units and devices with paste special. - ID 181424 - Placement via position doesn't work correctly for circuit components. - ID 183810 - Project Templates: Attribute Status values are missing. - ID 191112 - EB doesn't start with special language settings. - ID 194953 - Framingbehavior is not working corretly in some cases. - ID 195418 - Wrong pin types cause visio conflicts. ---------------------------------------------------------- Patch8 for Engineering Base 6.7.1 corrects the errors: - ID 176788 - Update from Catalog: Multi-Catalogs are not working anymore. - ID 179576 - Sub-circuit: no preview when unit frame is part of the CC. - ID 183675 - Multi Terminal Block Diagram: breaks with message. - ID 186285 - XML - Export system masks fails - ID 187514 - Update From Catalog Wizard: Sub-devices are duplicated when updating in project. - ID 188074 - passive pin over AucoXML- Substructure pins do not find their AO pins. - ID 188134 - REST Service: Dictionary references not handled correctly. - ID 188650 - Connector Wizard: Error messages are displayed after confirming connector definition. - ID 189021 - Save as XLS (via ODBC) does not work anymore after security updates on Windows. - ID 189162 - Import and Update Items: Error message appears when importing an .xls file. - ID 189163 - Import of Images: Error message appears when importing an .xls file. - ID 189273 - Import of Images: Images can not be imported. - ID 189284 - EB has a problem running VBA macros (IDE FM20.dll). ---------------------------------------------------------- Patch7 for Engineering Base 6.7.1 implements the following Features: - ID 157273 - TBD: Graphic wire jumpers should be editable in Terminal Block Designer. - ID 175437 - Terminal Block Diagram: Set graphical wire jumpers external and internal. Patch7 for Engineering Base 6.7.1 corrects the errors: - ID 175780 - Shape construction: Incorrect behavior at symbols with draw point. - ID 178172 - WireView Export: The non-visible "part of" attribute should not appear during export. - ID 179918 - Makro Update Customizing: Import creates stencils although this is not necessary. - ID 180651 - Update of Customizing overrides when exporting objects that differ only in upper / lower case. - ID 181651 - IC-Code / Wire management: deleting module does not lead to a trigger. - ID 183005 - Automotive SYS-Update-Manager: Exists at a VWS shape only it's own history entry, then the VWS should be merged despite different control. - ID 183119 - Project import incomplete. - ID 183353 - Terminal Block Diagram: extern Wire Jumper are rotated in TBD. - ID 183848 - Automotive Wire Management: Can not assign material. - ID 183866 - Automotive Contact Manager: In projects without 'Classification Tags approved' -attribute the selected set of contacts isn't okay. - ID 183873 - Automotive Contact Manager: Colouring of not connected cavities is wrong. - ID 183882 - Automotive QS-Tool: error if specification does not contain a part number, but special cable had a part number. - ID 183908 - Automotive Contact Manager: Colouring of cavities without 'connector terminal finish' not correct. - ID 184614 - KBL-Export / IC-Code: EB has a problem with the module consistency check. - ID 186738 - ATM: Copying of typicals results in error messages. ---------------------------------------------------------- Patch6 for Engineering Base 6.7.1 corrects the errors: - ID 180174 - After deinstallation / installation EB 6.8.0 the database manager does not start. - ID 182743 - Macro: "Update From Catalog Wizard" freezes. - ID 183658 - SmartPDF: When output a project, errors appear and the output PDF is blank (0KB). - ID 184495 - PVE: Error message when using a modular plug. ---------------------------------------------------------- Patch5 for Engineering Base 6.7.1 implements the following Features: - ID 172768 - Create custom database update: Update all custom macros. - ID 178037 - SheetBOP for detecting whether a line break within a word occurs in one of the set display languages through the text frame. - ID 182351 - Reset migration flag on sheets using ExecuteSpecialAction (for dynamics, remove shapes with "defective" Resize handles). Patch5 for Engineering Base 6.7.1 corrects the errors: - ID 179848 - Mechanism for checking and repairing whether Preview is present to Stencil does not work. - ID 179897 - Export Project Parts: More sheets are exported than selected. - ID 180584 - Automotive wire management: Special wire specifications do not have any effect on material selection in the case of multi-selection of connections. - ID 180737 - KBL-Export: Incorrect display of the harness name. - ID 180778 - Automotive Contract Manager: Requested from task handler not implemented (Option resolute conflict is always active). - ID 180830 - Elektrologic Import: Error message during connection list import. - ID 180855 - Automotive Cut-Off Point Allocation Manager shows no wire. - ID 180858 - KBL-Export: The name is not used when exporting derivatives / combinations. - ID 180985 - KBL-Export: Sum signal on connections are not recognized. - ID 180996 - KBL-Export: There will be an additional installation_information on each special_terminal_occurence. - ID 181010 - KBL-Export: Installation_information is not always written correctly in kbl (port: A1A). - ID 181090 - KBL-Export / IC-Code: EB has a problem at module consistency check. - ID 181406 - Lock Layer in master shape edition delete the layer and the assigned objects. - ID 181459 - Automotive SYS-Update Manager: Additional commentary on templates is lost when a second template is created in an existing ul. - ID 181921 - ATM: Assigned equipment are lost during copying on some sheets. - ID 182194 - ATM: Reference points are not always detected. - ID 182794 - SheetBOP: With the Russian display language, breaks are not recognized. - ID 183174 - Automotive Contract Manager: In databases where the classification attribute is not present on the contacts, no more contacts are displayed! ---------------------------------------------------------- Patch4 for Engineering Base 6.7.1 implements the following Features: - ID 144427 - Potential Wiring Editor: Wiring harness must be able to assign even without targets. - ID 160831 - Default value for wiring harness for automotive databases. - ID 162167 - Wiring Accessory Assistant: automatic assignment must not override manual. - ID 173618 - Potential Wiring Editor: additional wire information in the case of disconnection mapping. - ID 177579 - KBL-Export: For cables with composite signals the export need to abort with an error message Patch 6.7.1. - ID 177733 - Automotive SYS-Update Manager: VWS-Merge should keep stencil names or close vacancies. Patch4 for Engineering Base 6.7.1 corrects the errors: - ID 177624 - Automotive QS-Tool: Multi Wires at the same cavity are reported as an error, if they have the same color, this is wrong. - ID 178414 - Automotive Wiremanagement: Error loading material allocation. - ID 178461 - Automotive SYS-Update-Manager: Filling the gaps does not work correctly. - ID 178483 - Automotive QS-Tool: Check (2)(7) doesn't report any faults, if german formatted values are used for the diameters. - ID 178699 - Project exclusiv - another user can not open the edit mask on an object to which attribute instances should be added. - ID 178820 - Mechatronic Explorer - Export Macro - No access to temp. ME project.. - ID 179304 - Automotive QA Tool: Error message for a certain combination of checks in the multiuser environment.. - ID 179409 - Automotive Assembly Rule Manager: Run on all devices - is not possible. - ID 179677 - No revision attributes are added. - ID 179781 - ATM: Connection (electrical) of option is "moved". - ID 179981 - Macro: Update dialogs with type definitions / Update from Type Wizard clears set Boolean attributes. - ID 180066 - Webservice: Licensing only possible through token licensing. - ID 180534 - Navigation from stencil to sheet does not work - Standard Systemerror. - ID 180542 - Automotive Contact Manager: Incorrect entry / Information when the contact surface is missing. - ID 180705 - Automotive Contact selection: Contacts are displayed despite project classification. - ID 180892 - "-" in database name results in an error in database manager. - ID 180900 - Device frame can no longer be changed via VBA to another device in the 6.7.1. - ID 181744 - PVE: Pre-Conducted Cables: in material selection, the connection is indicated from pre-configured cable, not the name of the chamber. ---------------------------------------------------------- Patch3 for Engineering Base 6.7.1 corrects the errors: - ID 181283 - WebService: Object Data Request aborts with an empty result set at invalid Association. ---------------------------------------------------------- Patch2 for Engineering Base 6.7.1 corrects the errors: - ID 180451 - EB makes an unwanted UndoScope although none should be generated. AUCOTEC AG ----------------------------------------------------------------------------------------- EB6.7.1.153_Patch14 Hannover, 30.07.2018 Diese Textdatei gibt Hinweise zur Installation und Anwendung des Patch Installation des Patch - Zur Installation dieses Patches werden der Windows Installer in der Version 4.5 und Engineering Base in der Version 6.7.1 benötigt. - Patch14 für Engineering Base Version 6.7.1 beinhaltet Patch2, Patch3, Patch4, Patch5, Patch6, Patch7, Patch8, Patch10, Patch11, Patch12 und Patch13 für EB6.7.1. - Der Patch ist durch einen Doppelklick zu starten und zu installieren. Hierzu sind lokale Administrationsrechte erforderlich. - Der Patch muss auf allen "EB Client", allen "EB Server" und allen "EB Standalone" Anwendungen installiert werden. - Nach Beendigung der Setupausführung muss mit Hilfe des Engineering Base Datenbankmanager ein Datenbankupdate auf die Datenbankversion 38.16 vorgenommen werden. Hinweis: - Nach der Installation von mehreren Patches kann es vorkommen, dass beim Starten von EB der Windows Installer startet. • In diesem Fall sollte über die Systemsteuerung - Programme und Funktionen eine Reparatur von EB durchgeführt werden. - Betrifft alle EVU-Kunden: Das optionale Datenbank-Update PN498: EVU Content ist nicht im Patch14 enthalten. Installieren sie bitte erst das Patch9. Patchanwendung Patch14 für Engineering Base 6.7.1 implementiert die folgenden Funktionalitäten: - ID 172833 - EVU-Brücken im Terminal Block Designer. - ID 188353 - Assistent "Geräte mit Daten aus dem Katalog ersetzen": Die Struktur soll auch dann ersetzt werden, wenn das Attribut "Position" an Subgeräten im Katalog nicht gefüllt ist. Patch14 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 164161 - Auto Drähte werden teilweise nicht erzeugt. - ID 178542 - Nach Löschen eines Shapes bleibt Querverweis bestehen. - ID 180846 - Probleme bei der Materialzuweisung im Terminal Block Designer. - ID 197694 - EB startet nur bis 13%. - ID 198378 - Potenziale verlieren Querverweis nach Blattschließen. - ID 202384 - Bestehende Projekte können aus einer Datenbank nicht mehr exportiert werden. - ID 205915 - Probleme beim Füllen von Shapes beim Speichern als DWG-Datei - ID 209078 - "collation conflict" bei Verwendung von WebService nach EB Update. - ID 210412 - DWG-Export: Umbruchtextblöcke sind nicht korrekt formatiert. - ID 212606 - Verdrahtungslisten im Revisionsvergleich gibt ein falsches Ergebnis. - ID 212854 - Nach Verschieben von Zeichnungsordnern läuft AutoPotChain nicht an. - ID 216950 - EB hat Probleme mit der Sortierung der Blattvorlagen im Betriebsmittelplan. - ID 217216 - Makro Betriebsmittelplan beendet EB. ---------------------------------------------------------- Patch13 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 198230 - Problem mit einem Potenzial-Tag, wenn die Potenzial-Bezeichnung nur mit Leerzeichen gefüllt ist. - ID 198855 - In einem DWG sind die Textblöcke nach dem Export aus EB nicht korrekt. - ID 200481 - Mehrzeilige Attributtexte werden nach dem DWG-Export in einer Zeile angezeigt. ---------------------------------------------------------- Patch12 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 198444 - Falsche Position wenn Symbol mit Sheet BOP aucOpExecSheetDropSymbolDP platziert wird. ---------------------------------------------------------- Patch11 für Engineering Base 6.7.1 implementiert die folgenden Funktionalitäten: - ID 195535 - Anzahl von Windows User Groups in EngineeringBase-Gruppe erhöhen. - ID 196502 - Definition von neuen Systemuserattributen mit Einheiten. Patch11 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 183271 - Schaltung lässt sich nicht Projektübergreifend kopieren. - ID 184906 - TBD: gibt Fehlermeldung, wenn Potentiale unter Klemmleiste liegen. - ID 187134 - Advanced Typcial Manager: Optionsdarstellung wird nicht mitkopiert. - ID 190987 - Aucx-Import erzeugt nicht benötigte Betriebsmittelliste-Stencils. - ID 194535 - Export PID to DWG: Dateiformat ist fehlgeschlagen. - ID 194855 - Die Gesamtanzahl der Seiten eines Reports wird falsch angegeben. - ID 195166 - Toolbar flackert bei verschiedenen Aktionen. - ID 196065 - Revision: Fehlermeldung "GetSymbolAttributesData". - ID 197059 - EB friert bei grafischer Revision ein. - ID 197192 - Export PDF gibt File mit 0KB aus. - ID 197558 - Masken öffnen sich stark zeitverzögert. - ID 198230 - Problem mit einem Potenzial-Tag, wenn die Potenzial-Bezeichnung nur mit Leerzeichen gefüllt ist. ---------------------------------------------------------- Patch10 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 179564 - Konflikt beim Verbinden von Anschlüssen einpoliger Darstellung. - ID 180183 - Teilschaltungen aktualisieren, Verbindungen werden nicht richtig gesetzt. - ID 181106 - Fenstergrösse wird nicht mehr gespeichert. - ID 181227 - Einfügen Spezial:Shapes Einfügen und Elemente kopieren, Baueinheiten und Geräte verhalten sich unterschiedlich. - ID 181424 - Platzierung über Position bei gruppierter Teilschaltung funktioniert nicht korrekt. - ID 183810 - Projectvorlagen: Attributstatus fehlen. - ID 191112 - EB startet nicht bei nicht eindeutigen Spracheinstellungen des OS. - ID 194953 - Das Framingverhalten ist nicht korrekt. - ID 195418 - Konflikte in Visio durch fehlerhafte Pin-Typen. ---------------------------------------------------------- Patch8 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 176788 - Geräte mit Daten aus dem Katalog aktualisieren: Mehrfachkatalogauswahl funktioniert nicht mehr. - ID 179576 - Teilschaltung: keine Vorschau, wenn Unit Frame Teil der CC ist. - ID 183675 - Multiklemmenplan: bricht mit Meldung ab. - ID 186285 - XML - Export Systemmasken schlägt fehl. - ID 187514 - Geräte mit Daten aus dem Katalog aktualisieren: Sub-Geräte werden beim Aktualisieren im Projekt dupliziert. - ID 188074 - BDÜ: passiven Pin über AucoXML schreiben - Substructure Pins finden nicht ihre AO Pins. - ID 188134 - REST Service: Wörterbuch Referenzen werden nicht korrekt behandelt. - ID 188650 - Steckerassistent: Nach dem Bestätigen der Steckerdefinition erscheinen Fehlermeldungen. - ID 189021 - Speichern als XLS (über ODBC) funktioniert nach Sicherheitsupdate auf Windows nicht mehr. - ID 189162 - Elemente importieren und aktualisieren: Beim Import einer .xls Datei erscheint eine Fehlermeldung. - ID 189163 - Import von Bildern: Beim Import einer .xls Datei erscheint eine Fehlermeldung. - ID 189273 - Import von Bildern: Bilder können nicht importiert werden. - ID 189284 - EB hat ein Problem beim Ausführen von VBA Makros (IDE FM20.dll). ---------------------------------------------------------- Patch7 für Engineering Base 6.7.1 implementiert die folgenden Funktionalitäten: - ID 157273 - TBD: grafische Drahtbrücken sollen im Terminal Block Designer editierbar sein. - ID 175437 - Klemmenplan: grafische Drahtbrücken extern und intern setzen. Patch7 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 175780 - Shapebau: Fehlerhaftes Verhalten bei Symbolen mit Ziehpunkt. - ID 178172 - WireView Export: Nicht sichtbares Attribut "Teil von" darf auch nicht im Export auftauchen. - ID 179918 - Makro Update Customizing: Import legt Stencils an obwohl dies nicht notwendig ist. - ID 180651 - Update of Customizing überschreibt beim Export Objekte, die sich nur in Upper/Lower Case unterscheiden. - ID 181651 - IC-Code / Leitungsmanagement: Löschen eines Moduls führt zu keinem Trigger. - ID 183005 - Automotive SYS-Update-Manager: Existiert an einer VWS Schablone nur der eigene History Eintrag, so soll die VWS trotz unterschiedlicher Steuerung gemergt werden. - ID 183119 - Projektimport unvollständig. - ID 183353 - Klemmenplan: externe Drahtbrücken werden auf dem Klemmenplan gedreht. - ID 183848 - Automotive Wire Management: Zuweisen vom Material nicht möglich. - ID 183866 - Automotive Contact Manager: In Projekten ohne 'Klassifizierung Tags genehmigt' -Attribut ist der ausgewählte Satz von Kontakten nicht in Ordnung. - ID 183873 - Automotive Contact Manager: Färbung von nicht verbundenen Kammern ist falsch. - ID 183882 - Automotive QS-Tool: Fehler, wenn Vorgabe keine Teilenummer enthält, die Sonderleitung dann allerdings schon. - ID 183908 - Automotive Contact Manager: Färbung von Kammern ohne Kontaktoberfläche nicht korrekt. - ID 184614 - KBL-Export / IC-Code: EB hat ein Problem beim Modulkonsistenzcheck. - ID 186738 - ATM: Beim kopieren von Typicals kommt es zu Fehlermeldungen. ---------------------------------------------------------- Patch6 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 180174 - Nach Deinstallation / Installation EB 6.8.0 startet der Datenbank Manager nicht. - ID 182743 - Makro: "Geräte mit Daten aus dem Katalog aktualisieren" friert ein. - ID 183658 - SmartPDF: Bei der Ausgabe eines Projektes erscheinen Fehler und die ausgegebene PDF ist leer (0KB). - ID 184495 - PVE: Fehlermeldung beim Einsatz eines Modularsteckers. ---------------------------------------------------------- Patch5 für Engineering Base 6.7.1 implementiert die folgenden Funktionalitäten: - ID 172768 - Kundenspezifisches Datenbank Update erstellen: Alle Kunden Makros aktualisieren. - ID 178037 - SheetBOP zur Erkennung ob in einer der eingestellten Anzeigesprachen durch den Text-Rahmen ein Zeilenumbruch innerhalb eines Wortes erfolgt. - ID 182351 - Migrationsflag an Blättern über ExecuteSpecialAction zurücksetzen (für Dynamik bei Shapes mit "defekten" Resize Handles entfernen). Patch5 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 179848 - Mechanismus zur Überprüfung und Reparatur, ob Preview zu Stencil vorhanden ist funktioniert nicht. - ID 179897 - Export Projekt Parts: Es werden mehr Blätter exportiert als seletiert waren. - ID 180584 - Automotive Leitungsmanagement: Sonderleitungsvorgaben haben keine Auswirkungen auf Materialauswahl bei Multi-Selektion von Verbindungen. - ID 180737 - KBL-Export: Fehlerhafte Anzeige des Leitungsstrangnamens. - ID 180778 - Automotive Kontaktauswahl: Anforderung aus Lastenheft nicht umgesetzt (Option Konflikt auflösen ist immer aktiv). - ID 180830 - Elektrologic Import: Fehlermeldung beim Verbindungslistenimport. - ID 180855 - Trennstellenbelegungsmanager zeigt keine Leitungen mehr. - ID 180858 - KBL-Export: Beim Export von Derivaten/Kombinationen wird nicht der Name verwendet. - ID 180985 - KBL-Export: Summensignal auf Verbindungen werden nicht erkannt. - ID 180996 - KBL-Export: An jedem Special_terminal_occurence soll es eine zusätzliche Installation_information geben. - ID 181010 - KBL-Export: Installation_information wird nicht immer korrekt in kbl geschrieben (Anschluss: A1A). - ID 181090 - KBL-Export / IC-Code: EB hat ein Problem beim Modulkonsistenzcheck. - ID 181406 - Lock Layer im Master Shape Editor löscht den Layer und die assozierten Objekte. - ID 181459 - Automotive SYS-Update Manager: Zusatzkommentar an Schablonen geht verloren, wenn eine zweite Schablone in einer bestehenden VWS angelegt wird. - ID 181921 - ATM: zugeordnete BTM gehen beim Kopieren bei einigen Blättern verloren. - ID 182194 - ATM: Referenzpunkte werden nicht immer erkannt. - ID 182794 - SheetBOP: Bei russischer Anzeigesprache werden Umbrüche nicht erkannt. - ID 183174 - Automotive Kontaktauswahl: In Datenbanken an denen an den Kontakten nicht das Klassifizierungsattribut vorhanden ist, werden keine Kontakte mehr angezeigt! ---------------------------------------------------------- Patch4 für Engineering Base 6.7.1 implementiert die folgenden Funktionalitäten: - ID 144427 - PotentialVerdrahtungseditor- vordef. Leitungsstrang muss sich auch ohne Ziele zuordnen lassen. - ID 160831 - Defaultwert Leitungsstrang für alle Automotive Datenbanken. - ID 162167 - Verdrahtungszubehörassistent: automatische Zuordnung darf manuelle nicht überschreiben. - ID 173618 - Potenzialverdrahtungseditor: zusätzliche Drahtinfo beim Trennstellen-Mapping. - ID 177579 - KBL-Export: Bei Leitungen mit Summensignalen muss der Export mit einer Fehlermeldung abbrechen Patch für 6.7.1. - ID 177733 - Automotive SYS-Update Manager: VWS-Merge soll Schablonennamen beibehalten bzw. Lücken schließen. Patch4 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 177624 - Automotive QS-Tool: Multi Drähte an der gleichen Kavität werden als Fehler gemeldet, wenn sie die gleiche Farbe haben, dies ist falsch. - ID 178414 - Automotive Leitungsmanagement: Fehler beim Laden der Materialzuweisung. - ID 178461 - Automotive SYS-Update-Manager: Auffüllen der Lücken funktioniert nicht korrekt. - ID 178483 - Automotive QS-Tool: Check (2)(7) berichtet keine Fehler, wenn für die Durchmesser deutsche Formatwerte verwendet werden. - ID 178699 - Project exclusiv - ein anderer User kann die Editmaske auf einem Objekt nicht öffnen, an dem Attributinstanzen nachgelegt werden sollen. - ID 178820 - Mechatronic Explorer - Export Makro - Kein Zugriff auf temp. ME-Projekt. - ID 179304 - Automotive QA Tool: Fehlermeldung bei einer bestimmten Kombination von Checks im Multiuser umfeld. - ID 179409 - Automotive Assembly Rule Manager: Startbar auf allen Geräten - ist nicht möglich. - ID 179677 - Revisionsattribute werden nicht nachgelegt. - ID 179781 - ATM: Verbindung (elektrisch) von Option wird "verschoben". - ID 179981 - Makro: Aktualisieren von Dialogen mit Typdefinitionen/Update from Type Wizzard leert gesetzte Boolsche Attribute. - ID 180066 - Webservice: Lizensierung nur über Token Lizensierung möglich. - ID 180534 - Navigation von Schablone auf Blatt funktioniert nicht - Standard Systemerror. - ID 180542 - Automotive Contact Manager: Falsche Eingabe / Information, wenn die Kontaktfläche fehlt.. - ID 180705 - Automotive Kontaktauswahl: Kontakte werden trotz Projektklassifikation angezeigt. - ID 180892 - Minus im Datenbanknamen führt zu einem Fehler im Datenbankmanager. - ID 180900 - Device Frame kann in der 6.7.1 nicht mehr via VBA auf ein anderes Device geändert werden. - ID 181744 - PVE: Vorkonf Kabel, bei Mat-Auswahl wird vom Vorkonf. Kabel der Anschluss angezeigt, nicht der Name der Kammer. ---------------------------------------------------------- Patch3 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 181283 - WebService: ObjectDataRequest bricht bei ungültiger Assoziation mit leerer Ergebnismenge ab. ---------------------------------------------------------- Patch2 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 180451 - EB macht einen nicht gewünschten UndoScope obwohl keiner erzeugt werden soll. AUCOTEC AG