EB6.8.0.181_Patch2 Hanover, 12/02/2018 This readme provides installation and applying instructions of the patch Patch installation: - To install this patch, Windows Installer in version 4.5. - Patch2 for Engineering Base 6.8.0 contains Patch1. - The patch installation can be started by a double-click. Local administration rights are required here. - The patch has to be installed on all "EB Client", "EB Server" and all "EB Standalone" systems. - After Setup-Execution a database update to version 39.8 has to be performed with Engineering Base Database Manager. Note: After the installation of several patches, the Windows Installer may start when EB is started. • In this case, a repair of EB should be carried out via system control programs and functions Applying the patch: Patch2 for Engineering Base 6.8.0 implements the following Features: - ID 128582 - Update of customized items: For the update of modified stencils and the harmonization of the customizing with suppliers and project partners, a filter/ selection option based upon the stencil name has been added to the "Update of Customizing" wizard for an easier selection of the individual stencils. - ID 170139 - On saving circuit components, superordinate function components can be shortened by the template entries. This enables circuit components to also be created from sheets with presettings (function, location, equipment). However, the subordinate structure remains unchanged. - ID 175060 - A completed execution project can be merged into an As-built project. Deleted objects (functions, equipment, cables,...) will also be deleted in the As-built project. - ID 185179 - Before the export and before the transfer of execution tasks, a deletion list is created in an execution project. This deletion list is then attached to the execution task (XML file). - ID 195692 - It is now possible to obtain a list of all text blocks used on a sheet and to change its content via VBA. Patch2 for Engineering Base 6.8.0 corrects the errors: - ID 138434 - On importing catalog data from Eplan P8 by selecting Eplan P8 Import.zip file (which contains an ema zip-file + XML file), the catalog is now created with associated Master-Shapes. - ID 187134 - Representations of options were not copied by the Advanced Typical Manager for objects associated to the function via TypicalCopyMergeIndex. - ID 190309 - Bus potential markings of potential symbols in Visio are no longer removed inadvertently on opening the context menu. - ID 190985 - In the access control settings, access rights can now be assigned to multiple users at the same time via multi selection. - ID 191017 - Import of E-CAD Master Data: On repeating the import of an already existing zip file, an error occurred in EB. - ID 191051 - Problems on using filters with unauthorized filter values in the worksheet. - ID 194189 - Starting Engineering Base was aborted at 19% if there was wrong entry in registry. - ID 194370 - Macro Smart Datasheet: The interaction issue between the OK button and the password entry in the "Options" dialog has now been resolved. - ID 195166 - The issue that the toolbar flickered during various actions has now been resolved. - ID 195549 - The licensing of the macro Tag Sheet Automation has been adapted. - ID 195648 - Single line pins incorrectly took over the potential/substance of device. - ID 195758 - Potential Wiring Editor: The cable aggregation for core pairs was lost if the cable was allocated to a harness. - ID 196065 - In case of changes, the segment tags are graphically represented as clouds in revision PDF file during the graphical revision (on project level), and the error message "GetSymbolAttributesData" has been resolved. - ID 196214 - The problem that EB froze on deleting a part of newly placed circuit components has been resolved. - ID 196862 - Data such as catalog or project information can be obtained via the web service. The timeout issue has been resolved. - ID 197175 - EB Web Communication Server: The import of material catalog data from SAP to EB has been adjusted. The messages "Can't create object!" / "Can't store object!" do no longer appear. - ID 197543 - If a sheet is to be deleted via "Delete Sheets with Items," a message will now appear indicating that pins at shapes are being used which cannot be deleted. ---------------------------------------------------------- Patch1 for Engineering Base 6.8.0 implements the following Features: - ID 181461 - Potential Wiring Editor: Correct the sorting at the point of separation - ID 181992 - Potential Wiring Editor: Pre-assembled cable extension cable core handling Patch1 for Engineering Base 6.8.0 corrects the errors: - ID 191499 - Potential Wiring Editor: VBA error message when plug 'Potential Disconnect' set - ID 194800 - Potential Wiring Editor: Update problem with device-related potential indication AUCOTEC AG ----------------------------------------------------------------------------------------- EB6.8.0.181_Patch2 Hannover, 12.02.2018 Diese Textdatei gibt Hinweise zur Installation und Anwendung des Patch Installation des Patch - Zur Installation dieses Patches werden der Windows Installer in der Version 4.5. - Patch2 für Engineering Base Version 6.8.0 beinhaltet Patch1 für EB6.8.0. - Der Patch ist durch einen Doppelklick zu starten und zu installieren. Hierzu sind lokale Administrationsrechte erforderlich. - Der Patch muss auf allen "EB Client", allen "EB Server" und allen "EB Standalone" Anwendungen installiert werden. - Nach Beendigung der Setupausführung muss mit Hilfe des Engineering Base Datenbankmanager ein Datenbankupdate auf die Datenbankversion 39.8 vorgenommen werden. Hinweis: Nach der Installation von mehreren Patches kann es vorkommen, dass beim Starten von EB der Windows Installer startet. • In diesem Fall sollte über die Systemsteuerung - Programme und Funktionen eine Reparatur von EB durchgeführt werden. Patchanwendung Patch2 für Engineering Base 6.8.0 implementiert die folgenden Funktionalitäten: - ID 128582 - Update kundenspezifischer Elemente: Für die Aktualisierung modifizierter Stencils und die Harmonisierung des Customizings mit Zulieferern und Projektpartnern ist eine Filter/Auswahlmöglichkeit auf Basis der Stencilnamen im "Aktualisierung kundenspezifischer Elemente" -Assistenten hinzugefügt worden, damit die einzelnen Stencils einfacher zu selektieren sind. - ID 170139 - Beim Abspeichern von Teilschaltungen können übergeordnete Funktionsbestandteile um die Einträge aus dem Formblatt gekürzt werden. Damit können die Teilschaltungen auch aus Blättern mit Voreinstellungen (Funktion, Ort, Betriebsmitteln) erstellt werden. Die untergeordnete Struktur bleibt jedoch erhalten. - ID 175060 - Ein fertiges Änderungsprojekt kann in ein As-built Projekt gemerged werden. Gelöschte Objekte (Funktionen, Betriebsmittel, Kabel, ...) werden auch im As-built Projekt gelöscht. - ID 185179 - In einem Änderungsprojekt wird vor dem Export und vor dem Transfer von Änderungsmaßnahmen eine Löschliste erzeugt. Die Löschliste wird dann an die Änderungsmaßnahme gehängt (XML-File). - ID 195692 - Es ist möglich eine Liste der auf einem Blatt verwendeten Textblöcke per VBA zu erhalten und den Inhalt zu verändern. Patch2 für Engineering Base 6.8.0 behebt die folgenden Fehler: - ID 138434 - Beim Importieren von Katalogdaten aus Eplan P8 durch Auswählen der Eplan P8 Import.zip-Datei (die eine ema zip-Datei + XML-Datei enthält) wird nun der Katalog mit assoziierten Master-Shapes erstellt. - ID 187134 - Dass Optionsdarstellungen vom Advanced Typical Manager nicht mitkopiert werden, wenn ein Objekt mit TypicalCopyMergeIndex zur Funktion assoziiert sind. - ID 190309 - Buspotential -Markierungen von Potentialsymbolen in Visio werden beim Öffnen des Kontextmenüs nicht mehr ungewollt entfernt. - ID 190985 - Bei der Zugriffssteuerung ist die Rechtevergabe von Benutzern durch Multiselektion gleichzeitig möglich. - ID 191017 - Import of E-CAD Master Data: Beim wiederholten Importieren einer bereits existierenden Zip Datei trat ein Fehler in EB auf. - ID 191051 - Problem bei der Verwendung von Filtern mit illegalem Filterwert im Arbeitsblatt. - ID 194189 - Engineering Base wurde beim Start bei 19% beendet, wenn ein falscher Registry Eintrag vorhanden ist. - ID 194370 - Makro Smart Datasheet: das Problem mit der Wechselwirkung Ok-Button und Passworteingabe im OptionsDialog wurde behoben. - ID 195166 - Das Flackern der Toolbar bei verschiedenen Aktionen wurde behoben. - ID 195549 - Lizenzierung des Makros Stellenblattautomatisierung wurde angepasst. - ID 195648 - Einpolige Pins haben das Potential/Stoff vom Gerät übernommen. - ID 195758 - Potenzialverdrahtungseditor: Kabel-Aggregation bei Aderpaaren ging verloren, wenn das Kabel einem Bund zugeordnet wurde. - ID 196065 - Bei der grafische Revision (auf Projekt-Ebene), werden die Segment-Tags bei Änderugen in der Revision-PDF grafisch durch Wolken dargestellt und die Fehlermeldung "GetSymbolAttributesData" wurde behoben. - ID 196214 - Das Problem des Einfrierens von EB nach dem Löschen eines Teiles einer neu platzierten Teilschaltung wurde behoben. - ID 196862 - Über den Webservice können Daten wie Kataloginformationen oder Projektinformationen abgefragt werden. Das Problem mit dem Timeout wurde behoben. - ID 197175 - EB Web Communication Server: Der Materialstammdaten-Import von SAP nach EB wurde angepasst. Die Meldungen "Can't create object!" / "Can't store object!" erscheinen nicht mehr. - ID 197543 - Soll ein Blatt mittels "Löschen von Blättern mit Elementen" gelöscht werden, kommt nun die Meldung, dass Anschlüsse an Shapes verwendet werden, die nicht gelöscht werden können. ---------------------------------------------------------- Patch1 für Engineering Base 6.8.0 implementiert die folgenden Funktionalitäten: - ID 181461 - Potenzialverdrahtungseditor: Sortierung bei Trennstelle korrigieren - ID 181992 - Potentialverdrahtungseditor: Vorkonfektionierte Kabelerweiterung Kabelader- handling Patch1 für Engineering Base 6.8.0 behebt die folgenden Fehler: - ID 191499 - Potenzialverdrahtungseditor: VBA-Fehlermeldung, wenn Stecker 'Potentialtrennend' gesetzt - ID 194800 - Potenzialverdrahtungseditor: Aktualisierungsproblem bei gerätebezogener Potenzialanzeige AUCOTEC AG