EB6.7.1.153_Patch4 Hanover, 22/06/2017 This readme provides installation and applying instructions of the patch Patch installation: - To install this patch, Windows Installer in version 4.5 and Engineering Base in version 6.7.1 are required. - Patch4 for Engineering Base 6.7.1 contains Patch2 and Patch3. - The patch installation can be started by a double-click. Local administration rights are required here. - The patch has to be installed on all "EB Client", "EB Server" and all "EB Standalone" systems. - After Setup-Execution a database update to version 38.10 has to be performed with Engineering Base Database Manager. Note: After the installation of several patches, the Windows Installer may start when EB is started. • In this case, a repair of EB should be carried out via system control programs and functions Applying the patch: Patch4 for Engineering Base 6.7.1 implements the following Features: - ID 144427 - Potential Wiring Editor: Wiring harness must be able to assign even without targets. - ID 160831 - Default value for wiring harness for automotive databases. - ID 162167 - Wiring Accessory Assistant: automatic assignment must not override manual. - ID 173618 - Potential Wiring Editor: additional wire information in the case of disconnection mapping. - ID 177579 - KBL-Export: For cables with composite signals the export need to abort with an error message Patch 6.7.1. - ID 177733 - Automotive SYS-Update Manager: VWS-Merge should keep stencil names or close vacancies. Patch4 for Engineering Base 6.7.1 corrects the errors: - ID 177624 - Automotive QS-Tool: Multi Wires at the same cavity are reported as an error, if they have the same color, this is wrong. - ID 178414 - Automotive Wiremanagement: Error loading material allocation. - ID 178461 - Automotive SYS-Update-Manager: Filling the gaps does not work correctly. - ID 178483 - Automotive QS-Tool: Check (2)(7) doesn't report any faults, if german formatted values are used for the diameters. - ID 178699 - Project exclusiv - another user can not open the edit mask on an object to which attribute instances should be added. - ID 178820 - Mechatronic Explorer - Export Macro - No access to temp. ME project.. - ID 179304 - Automotive QA Tool: Error message for a certain combination of checks in the multiuser environment.. - ID 179409 - Automotive Assembly Rule Manager: Run on all devices - is not possible. - ID 179677 - No revision attributes are added. - ID 179781 - ATM: Connection (electrical) of option is "moved". - ID 179981 - Macro: Update dialogs with type definitions / Update from Type Wizard clears set Boolean attributes. - ID 180066 - Webservice: Licensing only possible through token licensing. - ID 180534 - Navigation from stencil to sheet does not work - Standard Systemerror. - ID 180542 - Automotive Contact Manager: Incorrect entry / Information when the contact surface is missing. - ID 180705 - Automotive Contact selection: Contacts are displayed despite project classification. - ID 180892 - "-" in database name results in an error in database manager. - ID 180900 - Device frame can no longer be changed via VBA to another device in the 6.7.1. - ID 181744 - PVE: Pre-Conducted Cables: in material selection, the connection is indicated from pre-configured cable, not the name of the chamber. ---------------------------------------------------------- Patch3 for Engineering Base 6.7.1 corrects the errors: - ID 181283 - WebService: Object Data Request aborts with an empty result set at invalid Association. ---------------------------------------------------------- Patch2 for Engineering Base 6.7.1 corrects the errors: - ID 180451 - EB makes an unwanted UndoScope although none should be generated. AUCOTEC AG ----------------------------------------------------------------------------------------- EB6.7.1.153_Patch4 Hannover, 22.06.2017 Diese Textdatei gibt Hinweise zur Installation und Anwendung des Patch Installation des Patch - Zur Installation dieses Patches werden der Windows Installer in der Version 4.5 und Engineering Base in der Version 6.7.1 benötigt. - Patch4 für Engineering Base Version 6.7.1 beinhaltet Patch2 und Patch3 für EB6.7.1. - Der Patch ist durch einen Doppelklick zu starten und zu installieren. Hierzu sind lokale Administrationsrechte erforderlich. - Der Patch muss auf allen "EB Client", allen "EB Server" und allen "EB Standalone" Anwendungen installiert werden. - Nach Beendigung der Setupausführung muss mit Hilfe des Engineering Base Datenbankmanager ein Datenbankupdate auf die Datenbankversion 38.10 vorgenommen werden. Hinweis: Nach der Installation von mehreren Patches kann es vorkommen, dass beim Starten von EB der Windows Installer startet. • In diesem Fall sollte über die Systemsteuerung - Programme und Funktionen eine Reparatur von EB durchgeführt werden. Patchanwendung Patch4 für Engineering Base 6.7.1 implementiert die folgenden Funktionalitäten: - ID 144427 - PotentialVerdrahtungseditor- vordef. Leitungsstrang muss sich auch ohne Ziele zuordnen lassen. - ID 160831 - Defaultwert Leitungsstrang für alle Automotive Datenbanken. - ID 162167 - Verdrahtungszubehörassistent: automatische Zuordnung darf manuelle nicht überschreiben. - ID 173618 - Potenzialverdrahtungseditor: zusätzliche Drahtinfo beim Trennstellen-Mapping. - ID 177579 - KBL-Export: Bei Leitungen mit Summensignalen muss der Export mit einer Fehlermeldung abbrechen Patch für 6.7.1. - ID 177733 - Automotive SYS-Update Manager: VWS-Merge soll Schablonennamen beibehalten bzw. Lücken schließen. Patch4 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 177624 - Automotive QS-Tool: Multi Drähte an der gleichen Kavität werden als Fehler gemeldet, wenn sie die gleiche Farbe haben, dies ist falsch. - ID 178414 - Automotive Leitungsmanagement: Fehler beim Laden der Materialzuweisung. - ID 178461 - Automotive SYS-Update-Manager: Auffüllen der Lücken funktioniert nicht korrekt. - ID 178483 - Automotive QS-Tool: Check (2)(7) berichtet keine Fehler, wenn für die Durchmesser deutsche Formatwerte verwendet werden. - ID 178699 - Project exclusiv - ein anderer User kann die Editmaske auf einem Objekt nicht öffnen, an dem Attributinstanzen nachgelegt werden sollen. - ID 178820 - Mechatronic Explorer - Export Makro - Kein Zugriff auf temp. ME-Projekt. - ID 179304 - Automotive QA Tool: Fehlermeldung bei einer bestimmten Kombination von Checks im Multiuser umfeld. - ID 179409 - Automotive Assembly Rule Manager: Startbar auf allen Geräten - ist nicht möglich. - ID 179677 - Revisionsattribute werden nicht nachgelegt. - ID 179781 - ATM: Verbindung (elektrisch) von Option wird "verschoben". - ID 179981 - Makro: Aktualisieren von Dialogen mit Typdefinitionen/Update from Type Wizzard leert gesetzte Boolsche Attribute. - ID 180066 - Webservice: Lizensierung nur über Token Lizensierung möglich. - ID 180534 - Navigation von Schablone auf Blatt funktioniert nicht - Standard Systemerror. - ID 180542 - Automotive Contact Manager: Falsche Eingabe / Information, wenn die Kontaktfläche fehlt.. - ID 180705 - Automotive Kontaktauswahl: Kontakte werden trotz Projektklassifikation angezeigt. - ID 180892 - Minus im Datenbanknamen führt zu einem Fehler im Datenbankmanager. - ID 180900 - Device Frame kann in der 6.7.1 nicht mehr via VBA auf ein anderes Device geändert werden. - ID 181744 - PVE: Vorkonf Kabel, bei Mat-Auswahl wird vom Vorkonf. Kabel der Anschluss angezeigt, nicht der Name der Kammer. ---------------------------------------------------------- Patch3 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 181283 - WebService: ObjectDataRequest bricht bei ungültiger Assoziation mit leerer Ergebnismenge ab. ---------------------------------------------------------- Patch2 für Engineering Base 6.7.1 behebt die folgenden Fehler: - ID 180451 - EB macht einen nicht gewünschten UndoScope obwohl keiner erzeugt werden soll. AUCOTEC AG